JMR Lucia Standmount Speakers

The Lucia, is a compact 2-way stand mount speaker. JMR wanted to develop a compact and extremely musical speaker that’s affordable offering a realistic tonality and very stable stereo image. It offers a naturally warm, well articulated mid range with a very smooth treble response along with it’s electroacoustic features offers a very easy load for amplifiers.

FEATURES

Acoustic Enclosure: The Lucias 19mm MDF cabinet with rounded front corners avoids the negative effect of sharp corners on the front baffle. It’s Bass reflex loading with laminar front event port allows close proximity to a rear wall.

Velvet Felt Surround: A non reflective velvet felt surround, surrounding the woofer and tweeter, diffracts first reflections on the cabinet and improves phase, directivity and soundstage.

Woofer: Manufactured in France this small 13cm woofer has a coated paper cone animated by a 25mm coil on an aluminium support. Its basket is made of ABS resonance free material. Its central phase plug is made of rubber and as a result completely inert.

Tweeter: The tweeter utilises an impregnated fabric dome with 25mm coil cooled by ferrofluid along with a textured ABS horn improving its efficiency and directivity.

Crossover: 12bd/octave Crossover frequency at 3500Hz. A Ferrite air coil with very low resistance uses 1.2mm oxygen-free pure copper winding cable for a fast and non-compressed low end frequency response. All of the crossover components are hand crafted, measured, matched and sorted into pairs to within a tolerance of 1%, this selection process plus the pairing of the components, enables JMR to produce perfectly matched speaker pairs.

Resistors & Capacitors: Non inductive ceramic resistors are used along with polypropylene capacitors.

Hand Assembly: The crossover network is assembled entirely by hand and mounted on an anti-vibration plate positioned as far as possible from any magnetic and vibratory interference. All components are soldered directly one onto the other using silver ROHS (Reduction of Hazardous Substances) soldering.

Internal Wiring: All interconnections use JMRs HP1132 silver/copper cable, soldered directly to the loudspeaker binding posts. This high end cable provides a true linear response over the entire frequency range of the speaker. It produces rich tones with an extremely high degree of resolution and transparency that lacks any harshness. WBT Block type speaker terminals allow the use of the following connectors, Spade, Banana or Bare cable.

SPECIFICATIONS